Caterpillar 3516B Power Series is a medium to high power diesel generator set that is suitable for mining, quarrying, and construction sites. Its detailed parameters are as follows:

Rated power: 1400 kW~2000 kW 

Number of cylinders: 16 

Displacement: 78.08 L 

Fuel consumption rate: 204 g/kW.h 

Rated voltage of generator: 380V/400V/415V/480V 

Engine water temperature: 95℃ 

Exhaust gas temperature: 530℃ 

When installing this generator set in a mining site, the following requirements need to be met:

The installation ground should be flat and even, without obvious bumps or depressions.

Place the equipment in a suitable location for operation and maintenance. If installed outdoors, a rain shelter should be built to increase the life span of the equipment.

Pay attention to the ventilation and heat dissipation of the equipment, especially during high-load operation.

Necessary adjustments and checks should be made before installation, such as adjusting the engine stability and the electrical parameters of the generator.

Cable and wire layout should be standardized, ensuring good grounding and compliance with international and local electrical safety standards to avoid accidents.

It is recommended to install a dedicated distribution room that fits the generator set, with a complete monitoring system to ensure power supply safety in the mining site.

Reasons for choosing this generator set may include:

High power that can meet the large power demand of mining, quarrying, and construction sites.

High-quality engine and generator that ensure reliable operation of the equipment.

Low fuel consumption rate that can save fuel costs.

Wide adaptability to various occasions.

Easy operation and maintenance, equipped with a complete monitoring system.

High brand recognition, as Caterpillar is an internationally renowned mechanical manufacturing enterprise with high product quality and technology level, which can bring customers a higher sense of trust.

长度，可以考虑将文本转换为以下格式：

卡特彼勒3516B动力系列是一▲款中高功率的柴油发电机组，适用于矿场、采石场、建筑工地等场合。

以下是其详细参数：

额定功率：1400kW~2000kW 

缸数：16 

排量：78.08L 

燃料消耗率：204g/kW.h 

发电机额定电压：380V/400V/415V/480V 

发动机水ぷ温：95℃ 

排气温度：530℃ 

在矿场安装此发电机组时，需要注意以下要∩求：

安装地面应平★整、均匀，不得存在明显的隆起和低洼； 

将设∑备安装在适当的位置，以便于操作和维修。若为室外安装，则需要为设备搭建防雨棚，以增加设备的使用寿命； 

安装时要注◥意设备的通风和散热，特◥别是在运行高负荷情况下； 

安装前要进行必要的调整和检查，如调整发动机》稳定性、发电机的电气参数等； 

电缆和电线布置要规范，保证其良好的接地并符合国际和当地的电气安全标♂准，避免事故发『生； 

建议安装正好容纳发电机组的专门配电房，并设置完整的监控系统，以保←证矿场的供电安全。 

客户选择它的理由：

高功率，能╲够满足矿场、采石场、建筑工地等场合的大功〒率需求； 

高品质的发动机和卐发电机，确保了设※备的可靠运行； 

燃∏料消耗率低，能够节省燃料成本； 

广泛的适▃应性； 

易于操作和维护，配备了完整的〓监控系统； 

品牌ζ　认可度高。